HOME | FIRE RETARDANT COATINGS | HOW IT WORKS | CONTACT US

	1-800-333-9197 8am-5pm (CST) Ph: 817-740-9197
	Dallas, Ft Worth, Austin, Houston, Corpus Christi, Wichita Falls, Abilene, Amarillo, Plano, North Dallas, El Paso, Laredo, Frisco, South Dallas, Lancaster, Dallas County, Tarrant County, Odessa, Waco, Midland, Tyler, Dallas, San Antonio,Lubbock, East Dallas, Grand Prairie, Irving, Dallas / Fort Worth metroplex, Houston area, El Paso

Flame Safe Wood Products fire retardant lumber, fire retardant plywood, fire retradant timber and fire retardant wood specalties have been tested by accredited third party testing agencies. Flame Safe warrants it’s products to perform as tested and will furnish test reports upon request, in addition to those published on FLAME SAFE'S web site
Flame Safe lumber is kiln dried to a moisture content not to exceed 19%. Flame Safe plywood is kiln dried to a moisture content not to exceed 15%. Flame Safe’s finished moldings and trim is kiln dried to a maximum moisture content of 6 to 12 % depending on the species and specific use. Pitch in the wood is crystallized permitting interior and exterior finishes to be easilly applied. When kiln dried, Flame Safe fire retardant treated wood becomes lighter and stronger, maximizing it's structural uses.

For those specifications that call for an exterior flame retardant lumber or plywood that will have exposure to the elements or high humidity conditions Flame Safe X-T is the product of choice.

In addition to passing the ASTM E84 Class A (UL723 Type 1)test which all exterior flame retardant lumber and plywood must pass, Flame Safe X-T will exhibit no increase in the listed classification when subjected to the standard rain test ASTM-D2898.

Flame Safe X-T has a clear finish which can be stained with a water based stain or painted with latex based paint. Flame Safe X-T is an exterior fire retardant treatment for lumber, plywood, timbers and specialty wood products. Applications such as exterior decks, balconies, stairs or siding are the notable examples of where Flame Safe X-T would be the logical choice.

PROPERTIES OF FLAME SAFE FLAME RETARDANT LUMBER and PLYWOOD

Permanence: Flame Safe exterior and interior flame retardant lumber and plywood is a permanent guard against the spread of flame

Strength: Flame Safe's aqueous based resin treatment and kiln-drying process strengthens the wood

Hygroscopicity: Flame Safe's exterior and interior flame retardant lumber and plywood is no more hygroscopic than untreated wood of any given species

Corrosion: Flame Safe exterior and interior flame retardant lumber and plywood does not demonstrate any greater corrosion rate than untreated wood on metal fasteners or hardware

Decorating and Finishing: Flame Safe exterior and interior flame retardant lumber surfaces can be stained and painted with ordinary preparation, however avoid using lacquer based stains or varnishes

Field Cuts: Flame Safe exterior and interior flame retardant wood allows the user to re-surface, mill, or rip lumber or plywood provided the exposed surfaces are coated with Flame Safe fire retardant coating (Fire Poly)

Versatility: Flame Safe exterior and interior flame retardant lumber and plywood is compatible with most waterborne preservative treatments for lumber, plywood and timber for exterior and in ground use
      
           FLAME SAFE is dedicated to setting not merely following the fireproof industry standards through ongoing research development and testing programs. FLAME SAFE continually endeavors to educate the marketplace on the significance of fireproofing combustible materials through the use of flame retardant products.

	Interior and Exterior Fire Retardant Treated Plywood		Interior and Exterior Fire Retardant Treated Timbers

HOME| FIRE RETARDANT COATINGS | HOW IT WORKS | CONTACT US

The information contained herein is the property of Fire Prevention Technologies d/b/a Flame Safe Chemical Corporation and Flame Safe Wood Products, Inc . © 1990 Revised 8/20/2009, Revised 2012